To design inserts for your storage boxes, there is a set with Fusion 360 templates and STL files.
You find all details about the storage boxes system on the project page and a complete list with all available boxes in the catalogue.
More Posts
Fusion 360 Storage Boxes Insert Template
I got various requests and great ideas from you about how to improve the storage boxes system. Thank you very much for all the great ideas and suggestions! 😄 One request I got many times ...
Read More
Read More
Let’s Print a Cat/Pet Feeding Device (Part 6)
The sixth part of this series is all about the input panel. We will talk about the layout of the front panel, the rotary encoder as the main component and I will explain my example ...
Read More
Read More
Pet Feeder – Position Sensor Tests
I worked on testing the sensor board. The first tests I did were about the position sensor. Recap Let me recap the design of the position sensor in the device: The turntable has five position ...
Read More
Read More
How to Assemble the MicroMaTch Connectors with a Hammer
I mentioned in one of my posts how to assemble the MicroMaTch connectors using a hammer, but never explained the rather simple method in detail. So I made a short video, explaining the exact technique ...
Read More
Read More
Adding a Light Barrier using Epoxy
As you read in my last post about the pet-feeding device project, there was an issue with the fill sensors. The lines from the 3d-print transferred the light directly to the sensor and made a ...
Read More
Read More
Let’s Print a Cat/Pet Feeding Device (Part 7)
The seventh part of this series is all about the sensor board. It hosts the position sensor and four fill sensors. Speaking of sensors sounds complex, but these are just pairs of IR-LEDs and phototransistors ...
Read More
Read More