last modified: October 23, 2025
Posted on 2017-03-18— Fun
I tried hot-air soldering on the Boldport Club project “The Matrix” and recorded the process. As a newcomer, I share what worked — I reflowed 120 LEDs in under 10 minutes, list the tools I used and link the video. Please read the full post and share any feedback or questions.
Posted on 2017-01-13— Common
I finished a small series of the PissOff project and noted practical lessons. I’ll use a stencil and solder paste next time, tried a larger speaker for better sound, and solved SD-card contact and flux-trimmer issues. Please read the full post for details and tips.
Posted on 2016-10-02— Common
I made a short video showing how I soldered Boldport's Touchy, an SMD board with a tricky chip. I admit I had a loose soldering tip early on and share what I learned. If you're interested, please watch the full video and check the board photos in the post.
Posted on 2016-09-24— Learn
I walk you through how I get camera-ready solder work: choosing the right iron and pliers, selecting solder and flux, careful prep, cutting and reheating for shiny domes, plus cleaning for macro photos. If you want neater prototypes or better product shots, read the full step-by-step guide.
Posted on 2016-09-21— Common
I tried soldering the Boldport Tap again, adapting Saar's Boldport technique to improve the finish. I carefully flush-cut wires, added solder until a small rounded dome formed, and filled component-side holes for a smooth transition. I used lead solder for shiny domes this time; read the full post for photos and details.
Posted on 2016-09-20— Common
I made a short video soldering the Boldport Project "Tap" and testing the PCBite PCB holder. I walk through the key steps, tool setup, and positioning tips so you can see how the holder performs. If you're curious, watch the full clip and follow along with the post.
Posted on 2016-08-17— Fun
My new Boldport Club project, "The Cuttle," arrived today — a minimal ATMega328-PU board shaped like a cuttlefish. Soldering was straightforward; I photographed each stage and made a short video of a simple LED effect. Read on if you'd like photos, the code, and a closer look.
Posted on 2016-07-21— Recommendations
I received my Boldport Club projects this week and enjoyed assembling Tap, The Lady, and the Cordwood Puzzle. I share photos, a short video, and honest notes about soldering, power needs, and assembly quirks. If you'd like a closer look, read the full post for details and tips.