Tag Archives: hot

Snow Flake Component Side

Today I show you a little bit longer video about the assembly of the component side of the snow flake panel.

Compared with the very small 0402 LEDs (1mm x 0.5mm) on the front side, the component side contains just regular 0805 resistors and capacitors.

The first part of the video shows how I apply the solder paste using a metal stencil. I use a system called “eC-stencil-fix” from Eurocircuits. This is basically a set of plates with metal knobs to perfectly align the board with the stencil. With a tick in a checkbox, they produce panels which perfectly work using this stencil fix system, which is really convenient.

Continue reading Snow Flake Component Side

Soldering Boldport Club project “The Matrix”

For the Boldport Club project “The Matrix” I used hot air soldering for the first time. After some experimenting and with help from Boldport Club members, it worked really well. I could colder the 120 LEDs in less than 10 minutes to the board.

I made a video about the process. Please keep in mind, I am new with this process, so this is absolutely no instruction video how things should be done. I may be absolutely wrong. 😀 Enjoy!

Here a list of the objects and tools you can see in the video:

If you have questions, miss some information or just have any feedback, feel free to add a comment below.