last modified: October 23, 2025
Posted on 2023-01-29— 3D Printing, Build, Projects
I tested three inexpensive, easy methods to add LED lighting to my modular 3D‑printed lantern using USB power: reused LED modules, short 5V strips, and WS2812B RGB with a microcontroller. I share parts lists, soldering tips, diffuser advice, and firmware steps—read on for step‑by‑step instructions and printable models.
Posted on 2021-12-30— 3D Printing, Build, How and Why, Learn, Projects
I built a 100×80cm 3D‑printed artwork and walk through the technical steps I used: preparing mathematical height data, generating Z‑maps, slicing into printable tiles with Blender and PrusaSlicer, and assembling and painting the final piece. If you're curious about the scripts and workflow, read the full tutorial.
Posted on 2021-04-02— 3D Printing, Build
I solved stray light hitting my pet-feeder's fill sensors by filling 3D-printed slots with black, low-viscosity epoxy. Using a syringe I achieved a nearly flush, cleanable surface that keeps measurements accurate. Read the full post for materials, step-by-step photos, and a short demo video if you'd like to try it.
Posted on 2021-03-22— 3D Printing, Build
I show how to adapt a MicroMaTch SMD connector to a breadboard using a striped prototyping board in under five minutes. I walk through cutting, scraping copper, and soldering a pin header so you can quickly test or swap modules—read the full post for step-by-step photos and tips.
Posted on 2021-03-14— 3D Printing, Build
I migrated several servers into a compact 19-inch rack and reworked my Arduino Uno fan controller to fit a 1U RND enclosure. I show choosing the case, adding a rotary encoder and filter circuits, testing signals, and 3D-printing panels. Read the full post for STL files and build notes.
Posted on 2021-02-10— 3D Printing, Build
I needed a robust way to reuse a 14-pin header on different breadboards, so I designed a simple two-part 3D-printed enclosure, soldered a ribbon cable, and set the header in epoxy. Read on for my quick step-by-step guide and the downloadable design files if you'd like to try it.
Posted on 2020-09-01— Build
I’ll walk you through my parametric, heavy wood-and-acrylic 3D-printer enclosure — from choosing boards and adjusting the Fusion 360 model to cutting parts, assembly, and 3D-printed hinges. If you want a stable, customizable enclosure for your printer, read the full tutorial for measurements, photos, and tips.