published: March 12, 2021 — last modified: October 23, 2025
For the pet feeding device, I ordered boards from OSHpark with the “After Dark” style. This colour combination of the black substrate with the copper and transparent solder mask is just beautiful.
I made this post just in case you did not see the pictures on Twitter or like to see them with a better resolution.
If you have any questions, missed information, or simply want to provide feedback, feel free to comment below or contact me on Twitter. 😄
More Posts
Posted on 2020-06-13— Common
I share why I’ve grown to trust Distrelec’s RND enclosures for hobby and professional projects — sturdy IP65 cases, clear lids, pressure plugs, and 3D models, all at low cost and fast delivery. If you’re choosing a case, read the full post for sizes, examples and tips.
Posted on 2019-07-09— C++, Improve your Code, Learn
I compare implementing a singleton as a class or as a module/namespace for Arduino firmware using simple LED driver examples and compiler measurements. I cover size, initialization and runtime trade-offs and explain when each approach makes sense. Read the full post for code, disassembly and practical recommendations.
Posted on 2015-08-20— Projects
I'm concerned my archived documents could absorb moisture in a root cellar with 75–90% humidity, so I built a DIY data logger to monitor conditions inside sealed boxes. I walk through parts, breadboard-to-stripboard assembly, tests and a wiring diagram — please read the full post for the complete build.
Posted on 2017-03-20— Common, Review
I bought a Weller WT solder station and appreciate its lightweight pencil, fast heating, and thoughtful features. Still, two persistent problems — a tip retainer that unscrews and one that deforms — reduced usability. I describe the issues, my contact with Weller, and the eventual retainer fix; read the full post for details.
Posted on 2018-03-17— Projects
I built a small test board for the TPS61092 to evaluate thermal performance, hand‑solderability, and layout before using it in my project. The chip stayed cool under 0.5A and the OSH Park PCB looked great. Read on for measurements, the BOM, and practical soldering tips if you want to try it.
Posted on 2021-01-02— 3D Printing, Projects
I'll walk you step-by-step through printing the mechanical parts of a fully functional, programmable cat/pet feeder. I share STL files, material and printer recommendations, and parts lists — all open-source on GitHub. If you have a 3D printer and want a challenging build, read the full post to get started.