I mentioned in one of my posts how to assemble the MicroMaTch connectors using a hammer, but never explained the rather simple method in detail. So I made a short video, explaining the exact technique I use.
If you have any questions, missed information, or simply want to provide feedback, feel free to comment below or contact me on Twitter. 😄
More Posts
How to Create a Large 3D Printed Artwork
I recently built a relatively large (100cm × 80cm) 3D printed artwork, which features a painted relief of mathematical functions. Read how I prepared the data, converted it into 3D printable tiles and converted them ...
Read More
Read More
Art Like Boards from OSHpark
For the pet feeding device, I ordered boards from OSHpark with the "After Dark" style. This colour combination of the black substrate with the copper and transparent solder mask is just beautiful. I made this ...
Read More
Read More
Storage Boxes System Survey
Please take the following survey to help with further development of the storage boxes system. It is the best way to nudge future changes of the system into the direction you like. 😄 More Posts ...
Read More
Read More
How to Print the Turntable Platform
When I wrote part 3 of the pet feeder series, I did not expect the light transmission issues of this part. Now, I have two solutions with new revisions of the part. Solution 1: Epoxy ...
Read More
Read More
Pet Feeder – Position Sensor Tests
I worked on testing the sensor board. The first tests I did were about the position sensor. Recap Let me recap the design of the position sensor in the device: The turntable has five position ...
Read More
Read More
Adding a Light Barrier using Epoxy
As you read in my last post about the pet-feeding device project, there was an issue with the fill sensors. The lines from the 3d-print transferred the light directly to the sensor and made a ...
Read More
Read More