The regular storage boxes set got an update today. All existing boxes are now available in a new revision with an improved corner design and there are four new boxes in the set. The title image shows all current boxes of this set.
The new 2×4 sized box is a simple addition to complete the different sizes.
Also, I added three regular boxes with additional walls in the box. If you have parts which belong together, this is a nice solution.
Each wall has a special shaped top side, where you can put a 12mm label.
As with any other boxes, the design is highly optimised for 3d print. I recommend a nozzle size of 0.4mm or 0.6mm with a layer height of 0.2mm or 0.35mm for the 0.6mm nozzle.
You will find all details and a free set of boxes on the project page. There is also a catalog with a visual overview of all boxes and sets.
Today, something slightly off-topic. This post is a short tutorial on how to build a heavy and solid 3D-printer enclosure. It uses a fully parametric design, where you can adjust the important dimensions – therefore ... Read More
For various sensors, attached to Raspberry-Pi computers, I wrote small command-line tools to read the sensor values over the I2C connection. While you can do this with a Python script directly, I found using a ... Read More
After successfully embedding magnets, I started experimenting embedding whole PCB boards into prints. I am sure, this is no new idea, but I found it very interesting. From the outside, the printed object looks solid ... Read More