The new set fits well into the series. In the picture above you can see a comparison between the flat (red), regular (blue) and tall (violet) boxes. All of them will stack perfectly and match in the same grid.
Compared with the flat and regular boxes, the tall boxes required a slightly optimised wall profile. You can clearly see the additional ribs, which were required to prevent the walls from bulging. These ribs also take the additional load if you stack heavier boxes on top.
I also optimized the corner profile, which creates now an even better 3d print result as you can see in the picture above.
You will find all details on the project page for the storage boxes system with free downloads of a small set of boxes. In the catalog, you will get a visual overview of all parts and you can buy the full sets in the shop.
The shown logic circuit performs a well known function; can you discover what it is? The circuit was not optimised for functionality, but to create a symmetric artwork. If you need to know the meaning ... Read More
Do you own a 3D printer and would like to start a complex and challenging project? Then let's print a fully functional, programmable cat or pet feeding device! 😄 In this multi-part series, I will ... Read More
The shown logic circuit performs a handy function; can you discover what it is? The circuit was not optimised for functionality, but to create a nice artwork and interesting puzzle. If you need to know ... Read More
What kind of logic circuit do you see here? This logic circuit was optimised for symmetry and art. Can you see which function is implemented in this circuit? You find more about logic gates and ... Read More
I created a new tool to easily convert bitmaps into code for MicroPython. This first version is just a start, creating a framework where I can add additional converters. If you have any questions, missed ... Read More