I just finished part 2 of the project description for the Outmoded Sequencer. In this second part I describe the steps from the prototype to the final device. I copied the preface from the page after this link .

Outmoded Sequencer Part 2

(Preface from the project page)

Building the Outmoded Sequencer was a really interesting project where I learned a lot. It was the first project with a custom designed PCB. Usually I just solder everything onto stripe boards, because I only produce one single device. The complexity of this device with the matrix forced me to design a proper PCB, soldering everything on a stripe board is feasible but requires more space and a different approach for the matrix.

Not everything turned out as well as expected. First there was the idea with the matrix using steel balls as switches: Even with the magnets generating a certain force to the pads, the steel balls do not connect as reliable as I would like they do. As you can see in the demonstration video, it is still possible to have a lot of fun playing with the sequencer – however better connections would make the experience even better.

Should you build your work Outmoded Sequencer? Yes, absolutely! But you should definitely use a different approach for the matrix. Best first only experiment with the matrix part until you have a working solution there before you add the other parts around.

Should you use the provided PCBs? No, better design your own board especially implement the matrix in a different way.

Should you use the circuit design as provided? Yes, definitely! The design is, in my opinion, a very good start and should give you a reliable and working device with minimal effort. Keep in mind: This is a minimal design and there and many ways how to improve certain aspects of the circuit. So feel free to address the problems if you have components left, to spend on this project.

Continue on the project page